The Art of Contrast Therapy: Unlocking the Healing Power of Hot and Cold
Introduction: Contrast therapy, the practice of alternating between hot and cold temperatures, has long been recognized for its therapeutic benefits.
Message Us For Discounts
Your wellness guide
Introduction:
Hydrotherapy, the therapeutic use of water, has been celebrated for centuries for its profound effects on physical and mental well-being. At Aquavoss, we have harnessed the power of hydrotherapy to create exceptional cold plunge experiences that can elevate your overall wellness. In this article, we will explore the remarkable benefits of hydrotherapy and how Aquavoss cold plunges can enhance your well-being. Get ready to unlock a new level of relaxation, rejuvenation, and vitality.
Immersing yourself in a Aquavoss cold plunge stimulates your circulatory system, resulting in improved blood flow and oxygen delivery throughout your body. The alternating temperatures of hot and cold water used in hydrotherapy promote vasodilation and vasoconstriction, which can enhance circulation and support the body’s natural detoxification processes. By increasing the efficiency of blood flow, hydrotherapy helps to eliminate toxins, nourish tissues, and promote overall vitality.
Hydrovoss cold plunges offer a soothing and therapeutic solution for muscle recovery and pain relief. The cold temperature reduces inflammation, numbs nerve endings, and constricts blood vessels, effectively relieving muscle soreness, swelling, and joint discomfort. By incorporating regular cold plunge sessions into your routine, you can support muscle recovery, accelerate healing, and alleviate post-workout or injury-related pain.
Stress is an inevitable part of modern life, but hydrotherapy can provide a much-needed respite. The immersive and tranquil experience of a Hydrovoss cold plunge promotes deep relaxation, calming the mind and reducing stress levels. The release of endorphins during the cold plunge can uplift your mood, alleviate anxiety, and promote a sense of overall well-being. By making hydrotherapy a regular part of your self-care routine, you can cultivate mental clarity, emotional balance, and resilience in the face of daily challenges.
Quality sleep is essential for overall well-being, and hydrotherapy can help you achieve a restful night’s sleep. The relaxation-inducing properties of Hydrovoss cold plunges prepare your body and mind for optimal rest. The regulated body temperature that follows a cold plunge can promote deeper sleep and improve sleep patterns, allowing you to wake up refreshed, rejuvenated, and ready to take on the day.
Hydrovoss cold plunges provide more than just physical benefits; they offer a holistic wellness experience. By immersing yourself in the tranquil waters, you can create a dedicated self-care ritual that promotes mindfulness, self-reflection, and inner peace. The luxurious design and craftsmanship of Hydrovoss cold plunges further enhance the experience, elevating your self-care routine into a truly indulgent and transformative practice.
Conclusion:
Hydrotherapy has long been revered for its healing and rejuvenating properties, and Hydrovoss cold plunges allow you to harness the power of hydrotherapy in the comfort of your own space. From improved circulation and muscle recovery to stress reduction and enhanced sleep, the benefits of Hydrovoss cold plunges are extensive and wide-ranging. Discover the transformative potential of hydrotherapy, unlock a new level of well-being, and embrace the luxurious experience that awaits you with Hydrovoss. Elevate your self-care, immerse yourself in the benefits, and unlock a world of relaxation, rejuvenation, and vitality.
Introduction: Contrast therapy, the practice of alternating between hot and cold temperatures, has long been recognized for its therapeutic benefits.
The cover for the Aquavoss Model 2 (hot tub and cold plunge) was strategically designed to handle dual temperature ranges.
The best decision is one that will enhance your overall experience of the Model 2, no matter where you decide to place it.
Maintaining pristine water quality is essential for the safety, comfort, and longevity of your cold plunge experience. Just as you invested in the design and construction of your cold plunge, it’s equally important that you invest in its chemical maintenance.
This article outlines how to resolve an airlock issue in your hot tub. It details two ways to identify an airlock and provides a step-by-step guide to fixing the problem.
Most of the cold plunge system is installed prior to delivery (the piping, the circulation pump, the ozone, the drains, the filter, etc.) and ready to go upon delivery. The chiller, however, was disconnected from the system before it was shipped out to you. Here is the reasoning … the chiller has refrigerant inside of it. The chiller cannot be pre-installed as the refrigerant would spill and in turn cause long-term damage to the unit. Therefore, we securely packaged the chiller inside of the cold plunge tank so that the refrigerant does not spill during the shipping process. In this blog, we are going to walk you through how to connect the chiller back into the system so that your cold plunge side is operational (this does not require any particular expertise). Please refer to the video below as well as the following instructions for guidance on how to install the Aquavoss Model 2 chiller: https://www.youtube.com/watch?v=_BaMeJs13Nk&t=128s 1. Remove the chiller from the cold plunge tank The chiller was strapped securely inside of the cold plunge tank. As you were unboxing the product, you should have seen signage and warning labels indicating where the chiller is and that it must be removed prior to laying the Model 2 horizontally. Remove the chiller from the cold plunge tank – make sure that the chiller is always upside right as you want to ensure that refrigerant never spills. 2. Remove the access cabinet The technology for both the cold plunge and the hot tub are inside the “access cabinet”. The access cabinet can be identified in three ways: a. The access cabinet is on the same side as the thicker part of the acrylic shell. b. The access cabinet has the larger vent on it as well. c. There is a black handle in the middle of the side panel (not featured in image). Remove the two black corner pieces by gently pulling them away from the unit. Once you remove the black corner pieces, there will be four screws exposed on each corner of the cabinet as shown in the image below. Remove the screws using the Allen wrench that was provided to you in the welcome package. After you have removed the screws, then pull using the black handle at the base of the panel (not shown in image). The panel is also magnetic so give it a good tug to remove it. IMPORTANT: The panel was designed to be very easy to access. Once you remove the screws for the first time, you do not need to re-insert them when you close the panel. The panel and corner pieces are magnetic – screws are not needed to keep them in position (therefore making it very easy to access). Keep the screws in case you ever want them for the future. 3. Unbox the chiller (keep it right side up to avoid spilling the refrigerant!) 4. Place the chiller onto the stainless steel frame inside of the access cabinet 5. Use the Allen wrench and the provided hexagonal headless screws to secure the chiller to the Model 2 frame The hinge is already on the stainless steel frame. There are four hinges (one on each corner of the chiller). Secure the chiller to all four hinges using the Allen wrench and provided screws. 6. Connect the chiller to the cold plunge control panel The cold plunge control panel is already pre-installed to the side panel. The control panel has three cords hanging from it – there are also three cords grouped together that are connected to the chiller. These three connections need to be made as shown in the picture below. Ensure that these are all plugged in securely as anything that is loose could lead to a problem with the proper functionality of the chiller and the control panel. 7. Connect the chiller to the circulation pump Behind the chiller, there is a small black cylindrical circulation pump as shown in the image below. You will notice a free-hanging cord next to the circulation pump with a female connector. Plug this female connector into the corresponding male cord that is connected to the chiller. This connection powers the circulation pump, the device that will circulate water in and out of the cold plunge tank. 8. Connect the chiller to the Ozone cleaning system The Ozone can be found on the underside of the Acrylic shell. You will find there a box labeled “Ozone” with a female electrical cord hanging from it. Plug that electrical connection to the corresponding cord on the chiller. 9. Install the cold plunge filter Included in your welcome package are two filters: one for the hot tub side and one for the cold plunge side. The smaller filter is for the cold plunge. You will find the filter house behind the chiller (next to the circulation pump). Remove the filter house cap by twisting counter clockwise. Use the filter wrench (if needed) to assist in removing the filter house cap. Center the filter onto the filter house base. Place the filter house cap on top of the filter house base twist clockwise to reattach the entire filter house. 10. Feed the 110v male electrical plug from the chiller and out the side panel Locate the cold plunge electrical access point and remove the cap from the hole. Run the male electrical cord (connected to the chiller) out through the hole. Place the cap back on top to cover the remainder of the hole. Note: Depending on the orientation of your house, it may make sense instead to run the extension cord into the cabinet. This is recommended for outdoor set-ups to prevent any rain damage to the electrical cords. Important: Do not plug in the electrical cord until the cold plunge tank has been filled with water. 11. Fill the cold plunge with water You’re almost there! Take your closest garden hose and start filling the cold plunge tank with water. It’s recommended to fill the
The hot tub runs on a 220v electrical connection and you will need a licensed electrician to properly install the Aquavoss Model 2.
The Model 2 is an expensive purchase that demands careful preparation. We ship your order exclusively with our trusted carrier partners. The hot tub is very securely packaged in an enclosed wooden crate – this ensures that it is delivered to you safely. Our trusted freight carriers will deliver the Model 2 curbside (i.e. your driveway). From a liability perspective, they unfortunately are not able to place the unit in your backyard.